Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX951W - Americas - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

NORYL GTX™ 951W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high heat resistance, excellent chemical resistance, high melt flow, and added mold release. NORYL GTX951W resin was designed for automotive under-the-hood applications such as power distribution boxes, relay boxes, and junction boxes.

UL Yellow Card Link E121562-102315342

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Density of melt	955	kg/m³	-
Thermal conductivity of melt	0.2	W/(m K)	-
Spec. heat capacity of melt	1500	J/(kg K)	-
Ejection temperature	216	°C	-
ASTM Data
Melt Flow Index, MFI	65	g/10min	ASTM D 1238
Temperature	280	°C	-
Load	5	kg	-
Mold Shrinkage, MD	1.55	mm/mm	ASTM D 955
Mold Shrinkage, TD	1.35	mm/mm	ASTM D 955

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2500	MPa	ISO 527
Yield stress	66	MPa	ISO 527
Strain at break	50	%	ISO 527
Flexural modulus	2370	MPa	ISO 178
ASTM Data
Tensile Modulus	2250	MPa	ASTM D 638
Tensile Strength at Yield	65	MPa	ASTM D 638
Tensile Strength at Break	57	MPa	ASTM D 638
Elongation at Yield	5	%	ASTM D 638
Elongation at Break	55	%	ASTM D 638
Izod Impact notched, 1/8 in	211	J/m	ASTM D 256
Izod Impact notched, Low-Temperature	100	J/m	ASTM D 256
Temperature	-30	°C	-

Thermal properties	Value	Unit	Test Standard
ISO Data
Coeff. of linear therm. expansion, parallel	100	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	100	E-6/K	ISO 11359-1/-2
Burning behav. at thickness h	HB	class	IEC 60695-11-10
Thickness tested	1.2	mm	-

Electrical properties	Value	Unit	Test Standard
ASTM Data
Dielectric Strength, Short Time	22.4	kV/mm	ASTM D 149
Dissipation Factor, 1 MHz	0.017	-	ASTM D 150

Other properties	Value	Unit	Test Standard
Density	1110	kg/m³	ISO 1183
Density	1100	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	95 - 105	°C	-
Pre-drying - Time	3 - 4	h	-
Processing humidity	≤0.07	%	-
Melt temperature	270 - 295	°C	-
Mold temperature	65 - 95	°C	-
Zone 1	255 - 295	°C	-
Zone 2	260 - 295	°C	-
Zone 3	265 - 295	°C	-
Screw speed	20 - 100	rpm	-
Back pressure	0.3 - 1.4	MPa	-

Diagrams

Characteristics

Processing

Injection Molding

Applications

Automotive

Regional Availability

North America

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.